GENERAL:

Series 269I flush aluminum door with internal stiles and rails connected by a 3/8" plated steel tie rod top and bottom. No snap-on or applied door edge at hinge or lock stiles.

MATERIALS:

Face Sheets: Shall be one piece 0.063" of anodizing quality, Embossed with a nine panel pattern (glass lite optional) with a minimum tensile strength of 22,000 psi. Both embossed face sheets shall be concealed under a 1/2" edge cap full parimeter.

Insulated Core: All voids between sub-frames shall be filled with a isocyanurate rigid foam board that is fire retardant be laminated between two sheets of 1/8" tempered hardboard for impact reinforcing.

Lamination: Sub-frame, insulated core, hardboard and embossed face sheets shall be bonded together with a thermosetting adhesive under pressure to form a water, heat, and chemical resistant bond.

Aluminum Sub-frame: 1-3/8" x 4-1/2" 6063T5 tubular aluminum sub-frame with a 1-3/4" integral edge cap top and bottom to insure proper protection from the weather. Sub-frame shall be connected by a 3/8" plated steel tie rod top and bottom. Overall door tolerance shall be plus or minus 1/16". Extrusion tolerances shall be as set by the American Manufactures´ Association.

No spec drawing is currently available for this model.